[urq] Brake Master Cylinder
fdekat
fdekat at sentex.net
Tue Oct 5 10:36:42 PDT 2010
>Date: Tue, 5 Oct 2010 12:19:43 -0400
>From: Aol <kleinbiker1 at aol.com>
>Subject: Re: [urq] Brake Master Cylinder - early vs late - and much
needed
>To: "audiqtrocp at aol.com" <audiqtrocp at aol.com>
>Cc: "urq at audifans.com" <urq at audifans.com>
>Message-ID: <1DBFF227-BF58-4C03-8FA6-C32F637F949C at aol.com>
>Content-Type: text/plain; charset=us-ascii
>I don't know if this helps at all but I seriously got a rebuilt one from
>Napa just a few months ago. I believe they also told me it fit the 5k as
>well. I have an 85 and the MC has been working perfectly so far.
>Chris
I had a similar experience at NAPA, and was I surprised when they had it in
stock! I can't rememebver if it was steel or Aluminum, but it fit my 'late'
83 urq (under hood fusebox) just fine. It *must* cross to something more
mainstream?
"Bench Bled" it with the supplied tubes, and didn't even have to bleed the
brake system after installation.
=Frank=
More information about the urq
mailing list