[urq] urq Drivers side tie rod

[Louis-Alain Richard]

I'm sending you the PDF of the tie-rod page...

Looks that the driver side tie rod is slightly bend at the wheel end. 

Wait, I'll pop the hood on mine...

Waiting 2 minutes...

Answer ? Yes, it is bend twice naturally. See the picture I took from the
wheelwell.

HTH,

Louis-Alain



-----Message d'origine-----

Sorry for asking questions without using the search function...

i know the passenger side tie rod has a bend in it to clear the wastegate
etc. I just returned from the alignment shop and they told me they couldn't
align the car because the drivers side tie rod is bent. I come home get the
wheel off and look - it's not just bent, it's bent twice. They look like
intentional bends, not oh-shit bends. 

I looked in the Bentley and that drawing shows straight. I look on
AutoHausAZ website and that one shows straight as well. 

Can anyone verify if their car has a straight drivers side tie rod or if
there are two bends in it? 

With this event coming up Im supposed to be done with the car and working on
the other aspects of the weekend ahead. I don't want to either order a part
that will show up wrong or take the time to pull the tie rod out when it's
un necessary.

Thanks again guys