[urq] Rear Caliper Carriers Rotors V8/200Q on UrQuattro

[Ben Swann]

OK - I am getting the picture and confirming with part numbers in ETKA.  I am cc'ing the
UrQ list so this info is captured.

I see carriers are the same for V8Q, 200Q and presume C4-S: 447 615 425A 

Calipers are the same: 447 615 423(R) and 424(L)

And wouldn't you know I think I have the rotors in my garage - a little oxidized.
Can't tell for sure since there is no part number stamped, 
diameter/thickness is same 269mmX20mm,
but offset is deeper than the 200rotors by about 15mm.

So I just need to source carriers and maybe exchange the 200 Rotors for V8.

Thanks!

Ben

[-----Original Message-----
From: Mike Sylvester [mailto:mike at urq20v.com] 
Sent: Monday, September 13, 2010 11:35 AM
To: Ben Swann
Subject: RE: [Marketplace] Wanted: Rear Caliper Carriers V8/200Q

The calipers and carriers are all the same  200q20v/V8/C4 s-car.
The rotors are not. For the offset to work out on the urq rear strut housing you need to
use the V8/C4 s-car rotor.  The 20v rotor will require the carrier to be shimmed.  I did
that when I first converted my car since I transplanted everything right over from a
200q20v.  When I bought new rotors, I got the S-car type.

Mike

www.urq20v.com

> -------- Original Message --------
> Subject: RE: [Marketplace] Wanted: Rear Caliper Carriers V8/200Q
> From: "Ben Swann" <benswann at verizon.net>
> Date: Mon, September 13, 2010 11:15 am
> To: "'Mike Sylvester'" <mike at urq20v.com>
> Cc: <benswann at verizon.net>
> 
> 
> Mike,
> 
> Just trying to see how badly I've screwed up so far.
> I ordered a set of rear calipers and rotors for the 200Q20V - heavy duty vented
rotors.
> Will the calipers work or are they different too?
> 
> Thanks,
> 
> Ben]