[urq] Rear seat belts

Patrick Carlier p.carlier at pandora.be
Sat Dec 17 06:49:06 PST 2011


The problem is the Coupe GT .
The belts are in a slightly different location cause the cgt doesn't have 
mcpherson suspension
 on the rear axle .
I had thesame problem , and solved it by adapting the parcel shelf .
It's almost cardboard so you can cut it with a knife in a matter of speech

Pat

----- Original Message ----- 
From: "Steve Schmidt" <schmidt694 at gmail.com>
To: <urq at audifans.com>
Cc: "Scott Doherty" <sjfd1 at yahoo.com>; "Roman" <klodzko at hotmail.com>; "nate" 
<n-engelbert at terrans.net>; "Tim Maskus" <tmaskus at up.net>
Sent: Saturday, December 17, 2011 1:04 PM
Subject: [urq] Rear seat belts


> I'm stumped;
> Either the PO didn't have rear belts or my body shop removed them.
> I don't have them.
> Regardless I have a set from a late model Coupe Gt interior.
> It appears that the ratchets bolt to the back of the  upright housing.
> Then through the sheet metal & the parcel shelf &  up the to C pillar.
> I found a perfect parcel shelf to replace mine & the slots for the belts
> line up in  different places than  the old one; about 6 inches closer to
> the seat.
> This would be no big deal except that the indentation on the left side is
> not cut out of the sheet metal?????????
> Dremel time......
> When I find the time I will look at a friends urq (same year 83 ) but in
> the meantime I was wondering if this is an anomaly or if belt locations 
> are
> year specific ?
>
> Thanks.
> Steve Schmidt
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
> 



More information about the urq mailing list