[urq] waste gate spring

[Steve Buchholz]

Factory boost on the US urq w/WX is 10.X PSI over ambient.  The value is temp dependent, you can see the spec chart in the IST M&A, which you can find on Martin's site (which is a link on the urquattro group yahoo page noted in the footer).

Steven Buchholz (mobile)

----- Reply message -----
From: dgraber460 at aol.com
Date: Tue, Feb 1, 2011 1:03 pm
Subject: [urq] waste gate spring
To: <urquattro83t at yahoo.com>, <urq at audifans.com>

If memory serves (and that is a very big IF), the stock spring in the stock cap gave about 8 PSI. If screwed down via the center screw it could go higher.


Dennis
Denver



-----Original Message-----
From: John Marshall <urquattro83t at yahoo.com>
To: urq at audifans.com
Sent: Mon, Jan 31, 2011 2:09 pm
Subject: [urq] waste gate spring


I have a Audi urq, early (83,84,85?) waste gate spring w/ 3/16 ,  inch wide  
lack painted stripes vertically/ on each coil , any ideas on it's pressure 
ating? Thanks John

     
______________________________________________
udifans urq mailing list
anage your list connection: http://www.audifans.com/mailman/listinfo/urq
ttp://www.audifans.com/kb/List_information
Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/

_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/