[urq] 20v swap questions

[Ken LiPani]

So just got the head back for the AAN and finishing up collecting parts and
information so i was hopeing that you guys could clear up my last
confusions.

I am swapping in an AAN on the factory ECU with a 3b intake and planning on
running a filter on a stick with the maf piped in, BUT im wondering if there
are any other options for boost hoses than the samco 3b setup or finding oem
3b hoses(like impossible to find). I guess i really only need the maf to
turbo and the TB inlet hose.

Secondly ive been told the URQ fuel pump can handle the stock 20vt demand
but can the fuel pump relay be reused from the URQ? i was looking at the
wiring and it seems like i would be able to as the AAN uses a 5 terminal
switch with a parallel 87 and 87a and i would just wire both up to the 87
leg. i think the only problem is the amount of juice im pumping through it.

Lastly whats the deal with the tach? i know the 20vs use the starter ring
but i honestly have no idea where the tach gets its signal for in the URQ.


Thanks
Ken