[urq] 3b: putting alt on driver's side and using 4kq power steeringpump

[Martin Pajak]

Hi Chris,

You sure??

I had a 3B with 7A alternator and low pressure pump.
My setup moved the pump to the middle groove which is the A/C one.
We used the same setup on Mike's car with 3B and 4kq alternator as well,
works with both.

Here are some pics.
http://www.quattro.ca/19853B/3B.htm

Hope this helps.

Martin Pajak

http://www.quattro.ca 

1982 Audi Ur-quattro, SQ project
1983 Audi 80 quattro, Euro 2-Tür
1984 Audi Ur-quattro, 20vt with 6-speed
1993 Audi 90 CS quattro, 2.5 TDI with 6-speed
1993 Audi 80 quattro Avant, 2.5 TDI with 6-speed


-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of Chris Miller
Sent: 14-Nov-12 00:04
To: urq at audifans.com
Subject: [urq] 3b: putting alt on driver's side and using 4kq power
steeringpump

Looking for any BTDT advice.

Had the 3b set up with a 7a power steering pump, but now want to use the 4kq
pump as it is lower pressure like the Urq rack.  

However, if I mount the 4kq pump, it needs to align in the outer most pulley
on the crank, not the inner most ...  

So, now the alternator that I installed using the 7a mount has to move
further back to use the center or inner groove on the crank pulley.

 

Is there a mount that will allow the alternator on the driver's side (left)
while leaving room for the 4kq style power steering pump?

Thanks, Chris

_______________________________________________
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
http://www.audifans.com/kb/List_information

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2793 / Virus Database: 2629/5892 - Release Date: 11/13/12