[urq] 6 speed into my Urq

[djdawson2 at aol.com]

Excellent, Pat.  I will be saving your notes.  Thank you.

Dave

 

 

 

-----Original Message-----
From: Patrick Carlier <p.carlier at pandora.be>
To: urq <urq at audifans.com>; djdawson2 <djdawson2 at aol.com>
Sent: Sun, Sep 16, 2012 2:18 am
Subject: Re: [urq] 6 speed into my Urq


Yes , I have first hand experiance .
Not with an AAN , altough that is scheduled in my '81 urq   , but with a 7A 
in a coupe quattro body .
Exactly thesame shell , except for the enlarged fenders .

In an nutshell .

No body modifications are needed . Also the i nterior trim all fits as it as 
.
Except for a six speed shift knob .
GEt rid of all procon ten backetry if there is any .

Two custom transmission mounts made in 6mm stainless .
Possably the RS2 mounts will fit , never been able to test fit them it .

Front driveshafts from an S2 or RS2 .
You'll need the fronts struts  and all that  goes with them .

Prop shaft , I machined a 15mm shim cause the six spd is a little shorter 
then the 016 .

Speedo , the internal gears  from the 016 fit the CRB  .
CBR diff cover needs t o be tapped , and a custom cable mount needs to be 
machined
on the lathe . Could be done withouttapping if a press fit is made .
Done that to a few times .

Shiftlinkage :
Various bit's n pieces froem an urS4 , and a custom made linkage .
This was the  hardest part , took me more then a day to get it right .


I'm sure there are other solutions , but that's the way I did it and the 
car's a daily driver for 5 years now .


Pat
Belgium







----- Original Message ----- 
From: <djdawson2 at aol.com>
To: <urq at audifans.com>
Sent: Sunday, September 16, 2012 6:23 AM
Subject: [urq] 6 speed into my Urq


> It's been a long - long time since I've been able to play with my cars... 
> between a ton of work and never-ending home construction that's been 
> eating up my weekends for years, my toys have remained neglected  However, 
> now I'm getting back into it.  My '72 BMW 2002tii is on its way to Dallas 
> for a complete strip-down for body and paint work, after which I intend to 
> build a nice little turbo M10 engine for it (2 liter 4 pot, 8 valve).
>
> Also, I intend to start working on my '83 Urq this winter.
>
> To the point... I've heard bits and pieces of these discussions, but I'd 
> like to know if anyone here has had first-hand experience putting a 6 
> speed into an Urq.  I'd also love it if anyone knows of someone who has 
> documented this procedure.  Frankly, I'll take any information I can get.
>
> I've got an absolutely rust-free '83 looking for love, and an AAN and a 
> CRB just waiting for a new home.
>
> Thanks,
> Dave
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>