[urq] Brake bleeding
Mike Sylvester
mike at urq20v.com
Thu Sep 18 10:51:44 PDT 2014
Bleed all 4 corners.
Mike
> -------- Original Message --------
> Subject: [urq] Brake bleeding
> From: ANTHONY ATTARD <acattard at yahoo.com>
> Date: Thu, September 18, 2014 7:43 am
> To: "urq at audifans.com" <urq at audifans.com>
>
>
> Good morning,
>
> I replaced the brake master cylinder on my 83 Ur Quattro because it was the original. Unfortunately the pedal was not what I considered to be a hard brake pedal by today's standard. Anyway, after replacing the B-master cylinder I hoped I would get a harder pedal. But It did not turn out that way.
> I bled the master cylinder on the car, but I did not bleed all four corners. I did not think I needed too. Does anyone have any advice/suggestions etc. Would be appreciated. Thank you in advance.
>
> ACA
>
> 83 Ur Quattro, 2008 A3 S-line
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
More information about the urq
mailing list