[urq] Donor for Suspension.

[af]

Thanks John. I really want to keep my axles intact. I have an 01e up front and V8 rear diff with early 4000Q cups transplanted. Any thoughts on the cast versus stamped a arms. Andrew. 

Sent from my iPad

> On May 31, 2015, at 11:10 PM, John <johnkarasaki at msn.com> wrote:
> 
> Hi Andrew
> 
> I've been contemplating this exact thing for years. What I'm going to do is use the two piece struts from a cq. Then follow one of the numerous methods for 5 bolt conversion that's been done (machined urS4, S2, A4 rear, etc.).
> 
> The ABS wiring for the CQ is mostly separate with the main box under the rear seat with the sensor wiring from each hub housing going there.
> 
> I haven't looked at the Bentleys for years, but I recall correctly, you can use the under hood stuff from most of the late 80s through mid-90s Audi's.
> 
> But of course the best way would be to import all the RR parts from the 20vt urq. :)
> 
> Maybe Martin knows what outer stub axle can be used with the urq axles or if you can use the CQ axles with the urq inner CVs. Or if you can just swap the cups from one transmission to the other. I'm going to be running a 3b trans in mine, so I'll have to figure that out too.
> 
> John
> 
> On May 31, 2015 5:13 PM, af <afinn1 at gmail.com> wrote:
> Folks been tracking my urq for years now but Really missing anti lock. What are the best years for donor 80/90 series car for suspension and anti lock. Is it 1990 and 1991 80 and 90 quattro only or can I do any pre 1995 type as well? Would I want the cast suspension with 2 piece uprights? Would I use my urq hubs and what bearings to use front and rear? Thanks for any help. 
> 
> Andrew Finney
> 1985 urq V8
> 
> Sent from my iPad
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>