[V6-12v] ODB

[James4ihl at aol.com]

Hi --

Are you in Europe or the US? If you're in Europe, then the Erwin site is the 
only place I know that you can get a manual appropriate to a Euro model car. 
If you're in the US then you could get a Bentley manual (they come in printed, 
or CD-rom versions, I believe...). Both should list the relevant fault codes 
for your car. I don't know exactly what you're describing when you say you have 
an Ln 2 code. Fault codes are usually 5 digit codes with just numbers, no 
letters. What are you using to readout this code?

Unfortunately, I'm no help with the speedo problem because I've never had 
cause to look at it, and the Erwin manuals I possess so far do not cover that 
area - hopefully someone else on the list with a Bentley, or knowledge of that 
area may be able to help...

Good luck!
James

In a message dated 15/04/2004 8:49:08 am, wintre at science.uniswa.sz writes:


> Hi James
> 
> Thanks James for hooking me up with all sort of Audi relavant information. 
> Thanks so
> much. I appreciate it a great deal. I have learnt a lot from you James. 
> Thanx. Fine. My
> Audi is well so far BUT there is a small problem it displays Ln 2 and I 
> guess that's the
> ODB code. Thing is I did replace the Idle stabilize and now I don't know 
> what is going
> on let alone the meaning of this Ln 2 code.
> 
> Is there a place where I can GET the Audi ODB Code list/manual particularly 
> for this car
> to keep myself armed to the tooth ??
> Recall the other time you suggested that I check with the Erwin site. I did 
> that is just that
> my Master Card had problems so Im waiting for my bankers to fix it for me.
> 
> The other thing is my speedometer which is still not working. My Electrician 
> checked the
> speed sensor on the front wheel and found that one was faulty. So I have 
> installed two
> new speed sensors but still it doesnt work.  What else James that you can 
> think of that
> may be a problem before I check with the Dealer (you know they bite deep 
> into the
> pocket)
> Help me out pliz. I don't know what is wrong with my '96 A6 2.8 Manual 
> non-quattro.
> 
> 
> Cheers