[V6-12v] Gear oil, brake job

[James4ihl at aol.com]

Thanks Tom!!!

All back together now... doesn't seem to have cured the bloody hesitation 
though :(

James

In a message dated 22/3/04 6:19:07 pm, tomchr at ee.washington.edu writes:


> James,
> 
> > Guys, I have the old coolant temp sender out of the coolant pipe to
> > fit the new one, but I can't find the tightening torque in my
> > manual... does anyone have quick access to a Bentley?
> >
> > It's the TWO pin temp sender on the coolant hose on the right rear of
> > the cyl head (looking at engine bay from the front), not the 3/4 pin
> > thermo switch on the left rear...
> 
> The ECT (engine coolant temp) sensor torque is 15 Nm.
> The bleed screw torque is 15 Nm.
> I can't find the torque for the 3/4 pin thermo switch (and you didn't
> ask for it), but it's probably 15 Nm as well.
> 
> Tom