[V6-12v] 100/A6 front brake pad write-up

[Kent McLean]

Poncho wrote regarding the size of the caliper bolts:
 > Kent, I'm pretty sure they are 8MM.

Thank you one and all for your input.  The caliper bolts on my
'94 100 S Avant were a loose fit for a 7 MM hex driver. There is
no way 8 MM would fit; the bolt heads were clean and shiny, so
rust and dirt weren't an issue. I'm guessing maybe a 7.5 MM hex,
not available at my local Sears, but I've been told Snap-On
carries that size.

You can read the full write-up here:
<http://www.audifans.com/twiki/bin/view/Audi/BrakePadsFrontA6>

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke