[V6-12v] How to get the rear brake discs off

[Calvyn]

Rust penetrating oil on the mating surface and more of the deadblow hammer
from inside out.. That always worked for me during my years as a mechanic.

HTH
-Calvyn-

-----Original Message-----
From: v6-12v-bounces at audifans.com [mailto:v6-12v-bounces at audifans.com] On
Behalf Of Tom Christiansen
Sent: Saturday, June 11, 2005 9:07 PM
To: v6-12v at audifans.com
Subject: [V6-12v] How to get the rear brake discs off

Folks,

I was trying to change the brake discs on my 1994 90S. I got the front done 
easy, but couldn't for the life of me get the rear discs off. With the 
caliper, pads, and bracket off I'd expected the discs to pop out like the 
front did, but neither hitting them with a deadblow (plastic hammer with 
sand in it) nor tapping them with a hammer did the trick.

What's the deal?? How do I get those darn discs off?

Thanks,

	Tom

_______________________________________________
V6-12v mailing list
V6-12v at audifans.com
http://www.audifans.com/mailman/listinfo/v6-12v