[V6-12v] blink-blink-blink vs blinkblinkblink

[Lt.Kubosh]

Because I don't know what the 1034 bulb means some kind of LED technology?
You have to compare the current of the bulbs.
Original 21/5 bulb has cca 1.75Amp while brakes are on - lower current of
the new bulb wil cause the speed difference.


Martin



-----Original Message-----
From: v6-12v-bounces at audifans.com [mailto:v6-12v-bounces at audifans.com]On
Behalf Of Kent McLean
Sent: Tuesday, September 13, 2005 1:48 PM
To: quattro at audifans.com; v6-12v at audifans.com
Subject: [V6-12v] blink-blink-blink vs blinkblinkblink


The "Brake Light" warning light came on in my '94 100 S Avant. The left rear
was out.
The old bulb was a P21/5W. My FLAPS had the "equivalent" 1034, which is what
I got.
The brake light seems to work fine. But now, where my right side turn signal
goes
blink-blink-blink, like normal, the left side goes blinkblinkblink, about
twice as fast as
the right side.  My initial thought was "turn signal bulb burnt out", but a
check of the
lights showed both left front and left rear signals blinking, but blinking
fast.

Could it be the 1034 "equivalent" bulb isn't equivalent?

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke

_______________________________________________
V6-12v mailing list
V6-12v at audifans.com
http://www.audifans.com/mailman/listinfo/v6-12v