[V6-12v] Heater Core Kaput

[Calvyn]

You don't have to remove the entire steering column and dashboard? Wow!
Those crazy Germans...

-Calvyn- 
-----Original Message-----
From: v6-12v-bounces at audifans.com [mailto:v6-12v-bounces at audifans.com] On
Behalf Of Mike LaRosa
Sent: Friday, January 06, 2006 7:29 AM
To: Wilfried Link; V6
Subject: Re: [V6-12v] Heater Core Kaput



--- Wilfried Link <wilfriedlink at yahoo.com> wrote:

> Anyone ever DIY replace the heater core on an A6?


Yup.


> Mine
> is flooding the footwells with coolant and steaming
> the windows furiously. I have the Bentley manual,
> which makes the removal of the heater box look
> fairly
> straightforward, but repositioning the flaps inside
> the heater box after replacing the core looks
> fraught
> with danger without the VW/Audi special tool
> template
> (about $70 and a 7 to 10 day delay to get it.) Any
> experiences out there? Thanks in advance.
>


Yup.

It's a pain in the butt... but it can be done...

The biggest pain is to make sure you put them back
in correctly.  I did it twice before i got it right...

if ya have a digital camera use it ... alot ;)


other tidbits...

on my 93 100, same body as your 95 a6,  I had hard
time with
the interior panels along the tranny tunnel..


because my car is a beater and I was time crunched I
simply pulled
the 2 side panels off... they are not meant to do
that..  I used
black sheetrock screws to re-attach it when I was
done... unless
you really look it's not that noticeable...


Good Luck,

Mike
93 100 csqa


> Wil Link
> 1995 A6 Avant
> _______________________________________________
> V6-12v mailing list
> V6-12v at audifans.com
> http://www.audifans.com/mailman/listinfo/v6-12v
> 

_______________________________________________
V6-12v mailing list
V6-12v at audifans.com
http://www.audifans.com/mailman/listinfo/v6-12v