[V6-12v] Electrical grease recommendation

[Kent McLean]

Tom Christiansen wrote:
> I need some electrical grease that will allow a contact point to glide
> on a ring as the ring is turned without wearing down at an alarming
> rate. This is for the airbag contact thing James mentioned. 

I'd clean the ring with Stabilant-22 or DeOxit (or maybe just
a pencil eraser), then apply dielectric grease (available at
any FLAPS).

-- 
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke