[V6-12v] oil pan removal

[Sean Coriaty]

Oil pan removal on '93 100csq would be simple if not for the roll/
stabilizer bar blocking access to 3 or 4 bolts.  Tried removing roll bar
mounts/ bushings on subframe, but bolt heads turn with nut.  Accessing bolt
heads is extremely difficult on 2 or 3 bolts so they can't be held while the
nut is turned.  The 89-91 Bentley says little- something about bouncing
vehicle with wheels on ground while pulling roll bar.  Goal is to replace
oil pan.  Any advice?
Sean in NH