[V8] How do I remove the transmission cooler lines at the rad iator?

[Buchholz, Steven]

... BTDT!  Yes, it can take a bit of force to pull the lines out of the
radiator.  I too found my self calling in larger and larger implements to
get the lines out of #344's rad.  One thing that I think helped a little was
wiggling the lines back and forth a little to rotate the tip while prying
backwards ...

Remember to replace the o-ring seals when you reinstall!

Steve B
San Jose, Kaleefohnia (USA)
> 
> I think the subject says it all...  Took the allen head 
> screws out, and am 
> guessing this is a press fit, but I'm afraid to pursuade the 
> lines out with 
> much more force than I've already trid considering it's a 
> plasic radiator.
> 
> And they've been doused in penetrating lube.