[V8] Passenger side TB cover!!!!!! HELP
jpb3
jpb3wvu at frontiernet.net
Sun Apr 4 11:31:39 EDT 2004
Yes I have removed the bolt under the black triangular tensioner bracket. I
am having trouble with the bolt below the triangle. I have removed the
three on the lower portion of the cover, (1 short 2 long) but seem to have
one left that is barely visible and sits below the tensioner bracket just
above a casting protrusion. It is a recessed hex head bolt. I can only
surmise that this is what is holding on the cover as I have removed all the
other bolts including the generator, yet it is definitely still stuck on the
motor. I have taken a block of wood and hammer to it and it doesn't budge.
Thanks for the help.
john
----- Original Message -----
From: "David Head" <v8q at bellsouth.net>
To: "jpb3" <jpb3wvu at frontiernet.net>
Sent: Saturday, April 03, 2004 6:59 PM
Subject: Re: [V8] Passenger side TB cover!!!!!! HELP
> Did you move the serpentine tensioner up and put an allen wrench or
> drill bit in the 'holding hole'? There's a semi-hidden 12mm bolt under
> the black triangular portion... There's one 13mm on the bottom closest
> to the hrank, the rest are 12mm - long suckers...
>
> jpb3 wrote:
>
> >Hi all,
> >
> >I have all of the bolts out of the PS TB cover with the exception of the
hex
> >bolt below the tensioner. I am speaking of the recessed bolt just above
> >the casting protrusion on the lower portion of the cover. Can anyone
tell
> >me what size this is? I removed the alternator etc.. have the DS cover
off
> >(what a breeze compared to PS) and just need to get this last bolt out
so I
> >can proceed. Thanks for any help.
> >
> >john
> >
> >
> >_______________________________________________
> >Audifans V8 mailing list
> >Send posts to: mailto:V8 at audifans.com
> >Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> >Have an Audi V8 question? Check the Audifans Knowledgebase!
> >http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> >Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
> >
> >
> >
>
>
>
More information about the V8
mailing list