[V8] Climate Control Saga...Problem Found!!!

[David Head]

Wow - that's weird - there are 4 bolts that should hold it on, as I 
recall - 2 on each side. 10mm. And it its the real thin one, about 
2inches square - that's your oil cooler. There's a 13mm nut on each side 
that holds a bracket on, and that bracket has 2 10mm bolts that bolt to 
the oil cooler.
For now, just zip tie it in place. Make sure its not too damaged - you 
could lose a LOT of oil quickly.

FYI - the AC condenser is in front the the radiator...

Dave



Robert Campozano wrote:

>Hi,
>I am currently e-mailing from home so if you do respond to this post please e-mail me off list as well as to this e-mail address!!!  I went under my car and no sooner did I do that I found that (I am assuming it is this) the A/C condensor (looks like  a thin long radiator with a couple braided hoses on each side) had lost its bolt on the right passenger side and it was hanging and bumping into the pullies when I would turn the A/C on!  Can anyone provide me with any insight as to what size bolt I need to bolt the condensor back on?  I temporarily used a screwdriver to keep the condensor up and any insight on what size bolt it is would be appreciated..
>Thanks again,
>Zay Campozano
>rcampozano at mgmmirage.net (my audifans e-mail)
>zay at rennlist.net (my home e-mail)
>1990 V8 3.6L Auto
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>
>  
>