[V8] Hydraulic hose from Reservoir to PS pump

[Buchholz, Steven]

... since we're talking about the supply line to the pump it really
shouldn't matter if you need to re-use your old o-rings ... you should not
see a lot of pressure there.  In fact, if I find that the feed hose is
leaking on my car (just noticed a couple drops of green gold the other day),
I will most likely look into just replacing the rubber part of the line and
using conventional hose clamps ... This is exactly what I did for the
leaking return line from the rack to the reservoir ... works just fine!

Now, if we're talking the high pressure lines, I always replace the sealing
washers when I pull a hose ... pressure is pretty high in that part of the
system ...

Steve B
San Jose, CA (USA)
> 
> So I decided to replace my leaking hose from the hydraulic 
> reservoir to the 
> PS pump.  I got the new hose yesterday and notice that the 
> banjo ends have 
> what appears to be o-rings.  I didn't get any new o-rings, so 
> does anyone 
> know what size these are or should I just try to match them 
> at the local 
> home depot?  The other alternative is to reuse the old 
> o-rings presently on 
> the car.