[V8] Re: Eurologht Connector Wiring

[Kneale Brownson]

Thanks, Dave & Dave.

This ought to get me going.

Now, does anyone have a source for connectors that will match up with the
US DOT connectors in the wiring harness and then get relayed to these
lights?  I've got relays (one for highs, one for lows ought to do it,
right?) and a fuse holder so I can power the relays from the under-hood
jumper post with a fused 12 volts.  

Regards, Kneale

At 08:28 PM 8/24/2004 -0400, Dave Head wrote:
> From Dave Forsyth, March 02
>
>there are numbers on the back of the lamp next to the pin it locates .
>56b  LOWBEAM POSITIVE   TOP LEFT PIN
>56a  HIGHBEAM POSITIVE   TOP RIGHT PIN
>57   SIDEMARKER LIGHT     MIDDLE LEFT PIN
>58   INDICATER LIGHT IN HEADLAMP  MIDDLE RIGHT PIN
>Wire 57 & 58 TOGETHER
>31  GROUND                        LOWER LEFT PIN
>31  GROUND                        LOWER RIGHT PIN
>wire  31 & 31 TOGETHER
>
>
>
>Kneale Brownson wrote:
>
>>Can anyone tell me (especially by color) what wires go to which of the
>>connectors in the V8 Eurolight headlight connector shown here:
>>http://www.pbase.com/image/32974154   
>>
>>The connector has female sleeves to which the wires go.  They have real
>>short sleeves on the visible end for the wire ends with  a hole through the
>>side of those sleeves.  I presume this is for soldering on the wires rather
>>than for crimping them in place.  Those sleeves slide over the studs on the
>>light fixture.  
>>_______________________________________________
>>quattro mailing list
>>quattro at audifans.com
>>http://www.audifans.com/mailman/listinfo/quattro
>>
>>  
>>
>