[V8] Power steering hoses

[Kneale Brownson]

There are many Audifans participants using the Mobil product.  There have
been no reports of problems from adding it to Pentosin that I can remember.
 There are three parts to the high pressure hose shown in ETKA.  I've only
replaced the high pressure hose in my 200q20v, so I have no direct
experience with a V8 high pressure line.  The flexible part shown in ETKA
from the pump to a steel pipe is 441 498 892C.  The pipe itself is 441 422
897C.  The flexible hose at the rack end is 441 498 892B.  No idea of pricing.

At 07:25 PM 12/21/2004 -0500, george.fallot at verizon.net wrote:
>Last night I noticed a power steering hose leak.I had to add a qt. of fluid 
>just to see where the leak was coming from. Unfortuatly, it was only 8 
>degrees here on Long Island so I stopped there. It only leaks when I turn 
>the wheel pretty hard. The leak is in the expansion hose (at the pump 
>end)and goes to the rotary-slide valve housing, whatever that is. I would 
>like to use the car around town until I can get the part.My local supply 
>house says they need a part number or the hose, but I don't want to take it 
>apart before I have the part to repair it.
>Does anybody know the part number and cost.If it's too high I will take it 
>to my local hose shop and have it made.Also are there any negitives to using 
>Mobil dte-13m,and can they be mixed.
>