[V8] 3 spoke S6 steering wheel mod

[jpb3]

Ron,
No one on this list seems to have much experience doing this as I have asked
the same question several times.  There is a good write-up I found at
S-cars.org that gives detailed instructions on retro fitting a UrS6 3 spoke
sport into an UrS4.  Try this link.
http://www.s-cars.org/urs4s6/faq/f001/f001.html

There are some differences between a UrS4 column and the V8's....namely the
adjustable tilt.  I have a 3 spoke but it is an 2000 model although I don't
think there is much difference among the years, I could be wrong however.  I
still need an airbag and some time,  then I am going to attempt the switch.
Let me know if you do this and any advice you may glean from the experience!
Good Luck!

john burns

----- Original Message ----- 
From: "Ron Wainwright" <ron_01056 at yahoo.com>
To: <v8 at audifans.com>
Sent: Saturday, February 07, 2004 11:57 AM
Subject: [V8] 3 spoke S6 steering wheel mod


>   Listers,
>
>   Been wanting to do this & was wondering if anyones
> done it?, or know's how to do it. The wheel is from a
> 95.5 S6.
>  Is there an adaptor or just change out the spiral
> spring?
>  Any info would be great.
> Thanks
> Ron
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Finance: Get your refund fast by filing online.
> http://taxes.yahoo.com/filing.html
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
>