[V8] Removing Transmission

[CoultL at aol.com]

I posted a few hints a month or so ago but cant seem to find it.  The job is 
pretty straight forward.  Support the trans before you remove the subframe.  
The manual says to let the subframe droop but it is much easier to remove the 
two extra bolts required and take the whole thing off, control arms included.  
I left the front torque stop engine mount on.  It helped to hold the engine in 
proper orientation.  Make sure you get all the wires and wire clamps off the 
trans before you go yanking at it.  If you are stuck on any specifics that I 
might remember email me.  

-Justin Lewis