[V8] The results are in

[dsaad at icehouse.net]

Allright Steve - I am hot on your tail and will be double posting all the rest 
of this week!!

I guess all this really proves is that I talk to much.

shutting up

Dave


Quoting Jeremy Ward <jward at mti-interactive.com>:

> I joined this list a year ago after owning my V8 for 5 months and
> spending $75 / hr (not to mention parts!) to have my car worked on by a
> professional wrench.  For the life of me, I can't remember how I
> stumbled upon this list, but am very grateful that I did; you guys have
> GREATLY reduced my cost of ownership.  
> 
> In the last year there have been posts from over 350 different email
> addresses.  Now granted some of you have alter egos, rrr, email
> addresses, but still that's a lot.  I counted up (real
> non-scientific-like) the people who have contributed over 100 posts on
> their various email addresses since I have joined this email list.
> Results are not TOO surprising:
> 
> 296 - Steven Buchholz
> 229 - Dave Saad
> 216 - Keith Tackett
> 184 - Dave Coleman
> 179 - Dave Head
> 176 - Jeremy Ward
> 164 - Kneale Brownson
> 159 - Ingo Rautenberg
> 147 - Cobram
> 117 - Shawn Head
> 115 - Ed Kellock
> 100 - Justin Lewis
> 
> The Daves combined have close to 600 posts, or 14% of the traffic!
> There were also a ton of you who have posted between 50 and 100, so it's
> not too surprising that some very familiar names aren't on the above
> list (but I had to draw the line somewhere!).
> 
> Thank you all for your contributions, including those who lurk on this
> list and have only made a couple of posts; your willingness to share
> knowledge is appreciated.
> 
> Regards,
> 
> - Jeremy
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>