[V8] SEAL, Front Engine Crankshaft--TOO SMALL

[dsaad at icehouse.net]

If I remember right, I got my seals for cams,rear main, front crank and oil 
pump (same as crank) from Bow Wow auto parts. They were all off the shelf parts 
and fit just fine.


Dave


Quoting Ned Ritchie <Q at IntendedAcceleration.com>:

> Has anyone found that the replacement seals for the crankshaft on the
> front of the engine is too small.
>  
> What comes from Audi is sized in millimeters   35 x 48.0 x 10
> Part number 054 115 147 B whereas 
>  
> What I removed from our of the engine is sized 35 x 48.4 x 10
> Part number 069 115 147 C
>  
> This 0.4 mm difference in outside diameter prohibits the new seal from
> having the proper crush and staying in place.
>  
> Then who has an extra one of the older type that I could obtain?
>  
>  
> Ned Ritchie
>  
>  
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>