[V8] R12 to R134

[dsaad at icehouse.net]

How much vacuum is required?

Dave


Quoting rudedog714 <rudedog714 at alaska.net>:

> Hi John, R-12 is expensive if you can even find it. To convert to R-134 you
> need to put a vacuum on it and totally evacuate the system before you put in
> the R-134. However, if you're system pressure's down to where you're blowing
> hot air you'll need to find your leak first.The system should hold that
> vacuum after it's put on to evacuate the R-12. The freon just doesn't wear
> out and shouldn't lose pressure unless you have a leak somewhere. Good Luck,
> Bill
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>