[V8] (no subject)

[dsaad at icehouse.net]

For some reason you triggered the airbag light. I did the same thing. Did you 
turn the key on with the air bag disconnected?

My dealer wanted about $75 to hook up their scan tool and turn the light off.
That is almost half way to the cost of owning your own scan tool. (I think VAG-
COM is about $200)
I found an independant shop who turned mine off for free. If you expose the 
connectors (by removing the driver side console/tunnel cover (that carpeted 
piece) maybe you can get them to do it for cheap or even free. It takes about 
43 seconds to do the whole deal.

Dave


Quoting kyle leatherwood <kyle_leatherwood at hotmail.com>:

> I installed my new headlamp/turn signal switch last night and now that I
> 
> have everything back together, the airbag warning light is staying on. 
> I 
> have since checked all of the wires and everything is put back
> correctly.  
> What could be now triggering a code that wasn't there before.  Is there 
> anyway to clear the code to make the light go out without going
> to,........, 
> I hate to say it,
> the dealer.  Any help would be appreciated.
> 
> Thanks,
> frustrated, but now with headlights that work,
> 
> Kyle
> 
> _________________________________________________________________
> Store more e-mails with MSN Hotmail Extra Storage – 4 plans to choose
> from! 
> http://click.atdmt.com/AVE/go/onm00200362ave/direct/01/
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>