[V8] Power Steering Fluid - The all purpose driveway cleaner

Shawn Head s4qtro at bellsouth.net
Fri Mar 5 11:04:12 EST 2004


Whatever you do, don't put too much torque on it...i found that out the
hard way...right keith?

Shawn Head

-----Original Message-----
From: v8-bounces+s4qtro=bellsouth.net at audifans.com
[mailto:v8-bounces+s4qtro=bellsouth.net at audifans.com] On Behalf Of
Jeremy Ward
Sent: Thursday, March 04, 2004 9:28 PM
To: Kneale Brownson; v8 at audifans.com
Subject: RE: [V8] Power Steering Fluid - The all purpose driveway
cleaner

(With a booming voice like Ed McMann)  You are CORRECT, sir.

So I have been trying to remove the banjo bolt for the last 2 hrs...

(OK, those of you that have done this before, stop laughing please)

I can't get that sonofaB off of there!  The only thing I have done
successfully is to tear the 'ears' off the bolt.  What's the trick?

To give myself maximum room to work, I have removed the coil,
accelerator cable, air duct, and the distributor (plus rotor).  Still
can't get enough bite/torque on that rear banjo bolt.  Ratchet doesn't
fit down there, so I have been using a crescent wrench.  At one point I
had myself convinced that it was a left-hand thread...  :-)

Once it's out, I will have it rebuilt...  It's the getting it out that's
the trick part.

Any advice?  Please?  Before I start throwing things... :-)

Thanks in advance,

- Jeremy

-----Original Message-----
From: Kneale Brownson [mailto:knotnook at traverse.com] 
Sent: Thursday, March 04, 2004 4:50 PM
To: Jeremy Ward; v8 at audifans.com
Subject: RE: [V8] Power Steering Fluid - The all purpose driveway
cleaner

Your hose clamp won't do much good on that one.  It's the high pressure
hose from the pump to the rack.
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!




More information about the V8 mailing list