[V8] Re: Climate Control Saga...Problem Found!!!

[Ed Kellock]

I believe that radiator is the oil cooler.  The bolts that attach it at either end are M6x16, which is standard metric thread, 6mm diameter, and 16mm long, according to ETKA.

My belly pan is on so I can't see the relationship between a/c and oil cooler.

I'm assuming your belly pan is not installed.

Ed

============================================================
From: "Robert Campozano" <zay at rennlist.net>
Date: 2004/03/24 Wed PM 07:13:57 MST
To: v8 at audifans.com
CC: ekellock at adelphia.net
Subject: Climate Control Saga...Problem Found!!!

Hi,
I am currently e-mailing from home so if you do respond to this post please e-mail me off list as well as to this e-mail address!!!  I went under my car and no sooner did I do that I found that (I am assuming it is this) the A/C condensor (looks like  a thin long radiator with a couple braided hoses on each side) had lost its bolt on the right passenger side and it was hanging and bumping into the pullies when I would turn the A/C on!  Can anyone provide me with any insight as to what size bolt I need to bolt the condensor back on?  I temporarily used a screwdriver to keep the condensor up and any insight on what size bolt it is would be appreciated..
Thanks again,
Zay Campozano
rcampozano at mgmmirage.net (my audifans e-mail)
zay at rennlist.net (my home e-mail)
1990 V8 3.6L Auto
============================================================