[V8] V8 timing belt

[Korn, Bob]

The headers effectively block easy access to this nut.  I do it with a 1/4
drive socket,swivel, and some long extensions and a little grease or silicon
to hold the nut in socket until started.

Bob


-----Original Message-----
From: Ed Kellock [mailto:ekellock at adelphia.net] 
Sent: Tuesday, March 30, 2004 2:52 PM
To: V8 at www.audifans.com
Subject: Re: [V8] V8 timing belt


Is this the heat shield that bolts to the frame rail?  I don't recall
anything there that was particularly challenging.  I wonder if I can see
this on etka...

============================================================
From: cobram at juno.com
Date: 2004/03/30 Tue PM 01:18:28 MST
To: v8q at bellsouth.net
CC: V8 at www.audifans.com
Subject: Re: [V8] V8 timing belt

 David Head <v8q at bellsouth.net> writes:

> Parts NOT reinstalled: rear passenger side heat shield speed nut (if

One swivel socket, two universals, two extensions, a magnet and some
electrical tape...and it's STILL a PITA.  I only put it back because my
friends said it couldn't be done.

BCNU,
http://www.geocities.com/cobramsri/
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
============================================================


_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!