[V8] Help! Speed Sensor removal

[Buchholz, Steven]

... this should be a '91 5-speed so I must say I'm a bit mystified ... 

With the only special tool being a 1/4" drive ratchet to access the
attaching bolts, the toughest part I've found is reaching up to get at the
bails that keep the connectors engaged into the wiring harness ... and the
next time I need to do this I'll probably try pulling the left intake pipe
to allow access from above ...

Steve B
San Jose, Kaleefohnia (USA)
> 
> Thanks for the feedback.  That top down approach didn't work 
> for me either.  
> could get a reasonable angle on the bolts affixing the cover 
> plate to the 
> block once I loosed the bolt that holds the A/C lines in 
> position.  But yes, 
> this is a PITA job unless you remove the driver's side 
> manifold.  Anyway, 
> got it done yesterday and it fired right up.  Now I just got 
> to go take it 
> for a long ride to see if my stalling has been solved.  I'll 
> let you all 
> know.