[V8] V8 won't start when engine is hot!

[Kneale Brownson]

It's the ignition reference sender (the black one # 077 905 381)  that
leads to hard starting when the engine is hot.  However, reportedly this
product is NLA.  The Engine Speed Sender (the gray one # 077 905 381A)
supposedly is still available.  They can replace eachother as long as you
plug the wiring connector into the appropriate spot for the location in
which you mount the sender.  I used a gray to replace a black and put some
black electrical tape on the wiring to identify it as such.

At 07:29 PM 11/17/2004 +0000, jpb3wvu at frontiernet.net wrote:
>Hi guys, haven't posted in a while since I moved on to a 20V
>Turbo but I have an issue and need help.  Both Audis decided to
>sh*t on me at the same time.  S6 siezes the rear caliper while
>fiance is driving it and proceeds to turn the rotor into
>hamburger, and the V8 which I just put back on the road last
>week will now not start when it's warm.  The car always started
>very quickly since I have onwed it the last 5 years, I mean like
>in 2 cranks, but now all of a sudden will not start when the
>engine is warm.  When it is cold it starts right up, like
>nothing is wrong.  Any insight out there as to what this is?  I
>have not pulled any codes b/c I never have and don't know the
>procedure.  If I recall correctly from my 4 years of lurking on
>this list does a engine speed sensor sound like the problem? 
>Thanks for any help.  I am currently stuck at home b/c both of
>my Audis are down.......this sucks:(
>
>I must be sadistic to have 2 of these 4 ringed bast*rds!
>
>John
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!