[V8] Tempermental ABS sensors
Kneale Brownson
knotnook at traverse.com
Thu Nov 25 08:53:18 EST 2004
The sensors just push in to a stop against a shoulder in the housing. If
you just pulled them out a little and then pushed them back in, it's
possible some corrosion interfered with a proper placement.
Did you clean out the rust from the teeth the sensors read?
Did you remove the axles to do the boots? The passenger side axle is
different length. I don't know if it's possible to install them
incorrectly if they get mixed up, however.
At 08:54 PM 11/24/2004 -0800, Gunter Lorberg wrote:
>Question: What do I need to know to ensure that the ABS sensors are
>positioned properly?
>
>I replaced both front outer CV boots a couple of months ago. I gently pryed
>the sensors out a little to ensure clearance for removing the axles. I
>believe that I have pushed them back in as far as they will go (not
>forcefully, mind you). Since doing the boots, the ABS has activated
>unnecessarily at very low speeds in the final stages of deceleration on
>regular surfaces (just as I'm rolling to a stop....perhaps at speeds less
>than 5-10mph). I cannot tell if it involves one side or the other (or both
>for that matter). When accelerating AND turning (such as when pulling out
>of my driveway--again, at VERY low speeds) the quattro drivetrain now seems
>to 'bind' a bit--it feels as though one of the rear wheels is 'locked'
>slightly and unable to routinely compensate for different turning radiuses.
>My theory is that the ABS sensors are feeding incorrect info to the
>transmission ECU causing a solenoid valve to lock the multi-disc clutch in
>the planetary center differential.
>
>Everything worked well prior to moving the ABS sensors. The fluids in the
>front and rear differentials, as well as the transmission, are all clean and
>properly topped up.
>
>What should I do with the sensors? Remove them? Clean them? I hope that
>there is a simply solution.
>
>I would also like to announce that I have added a 2nd V8 to the garage at
>home. Another 1990...black with an automatic. Both are Canadian cars.
>
>Thanks for your help,
>Gunter
>
>
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question? Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all
>contributions welcome!
More information about the V8
mailing list