[V8] Clutch hydraulic hose source

[Ingo Rautenberg]

I recently had the high pressure line to the stering rack on the 'new' V8
repaired by PIRTEK for just under $100 with 5000psi continuous duty hose and
swivel connections to boot.  They have many locations:

http://www.pirtekusa.com/locations.asp

HTH

-Ingo

----- Original Message ----- 
From: "Thomas Barbera" <barberat at yahoo.com>
To: <v8 at audifans.com>
Sent: Tuesday, October 05, 2004 1:48 PM
Subject: [V8] Clutch hydraulic hose source


> Anyone know where I can get a replacement hydraulic
> hose for the clutch in my '91 V8 5spd?  This is the
> rubber/steel line that runs from the clutch master to
> the slave.  Mine burst about a week ago and I can't
> find a replacement.  Dealer says three weeks minimum.
> Would a 200 line work?  They both have the same clutch
> master and slave, but for some reason, don't share the
> same line between them.  Anyone know the differneces
> between the 200 and the v8?  How about a shop that
> could repair my existing line?  Any help would be
> greatly appreciated.  Without a car, I ride my bike to
> work, and the mornings are getting mighty cold.
> Thanks.
>
> Tom B.
> '91 V8 5spd
> '00 Ducati Monster 900S (only mode of transportation
> right now)
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.772 / Virus Database: 519 - Release Date: 10/1/2004