[V8] Brake/Hydraulic Hoses

[Ingo Rautenberg]

Regardless of who you deal with, make sure you specify Metric and that it is
for Automotive application AND that the hydraulic application uses a mineral
oil hydraulic fluid and that (in the case of high pressure lines) it can
withstand 3000 PSI working pressure.  I even had problems finding someone
who would do the work for me in the Detroit area for these parameters -- and
PIRTEK worked for me.  In any case, they will have to cut and solder new
fittings.  The swivel connections made it easier for me.  YMMV.  The  PIRTEK
I used in Detroit area was in Madison Heights and my contact there was
Oliver Romano, General Manager 248-336-8000.

-Ingo

----- Original Message ----- 
From: "Kneale Brownson" <knotnook at traverse.com>
To: "S_Matus" <scott_matus at yahoo.com>; "V8" <v8 at audifans.com>
Sent: Wednesday, October 06, 2004 10:23 AM
Subject: Re: [V8] Brake/Hydraulic Hoses


> "Everywhere" for me means a 500-mile roundtrip or shipping back and forth
> with a question of communications to make certain of the result.   If I
> have to ship, it might as well be to Spokane Hose, where we know they've
> already done numerous Audi hoses.
>
>
> At 06:18 AM 10/6/2004 -0700, S_Matus wrote:
> >I second the use of Pirtek.  They are an offshoot of Perelli.
> >
> >Yep, locations everywhere in the US.
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.772 / Virus Database: 519 - Release Date: 10/1/2004