[V8] 02 sensor finale

[Hoffman Anthony J A1C 552 CMS/MXMVC]

 The sensor is for a 1993 Ford F150 with a 5.0L (302) engine. About $44 if I
remember correctly.
And yes, If you can use the engine bolt on the belhousing, use it.

Tony Hoffman

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
QuickAudi at aol.com
Sent: 07-Oct-2004 7:12 PM
To: v8 at audifans.com
Subject: [V8] 02 sensor finale

So, I'm going to replace mine after my broken distributor mishap.  First,
what is the Bosch number of the generic 4 wire that will work in the V8?
Second, is it fine to ground it to the shock tower, or should I ground it to
the engine?  (Yes, I saw the discussion, but work has my brain fried.) I
hopefully get the car back tonight with a new power steering pump, righted
control arm (have to get it aligned again) and maybe even 8 running
cylinders.  Made the mistake of leaving the distributor cap off when I
started it to get it on the trailer, so #5 wire was cut in two.  Magnecor is
sending me a replacement, for a small fee.  I won't do that again.  


Joel
'90 V8q
'86 5kcstq
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!