[V8] servotronic connection on 90 V8?

[Korn, Bob]

My 90 has this connection as well.
Bob
90 V8Q 145K Pearl 

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Buchholz, Steven
Sent: Monday, October 11, 2004 6:31 PM
To: v8 at audifans.com
Subject: RE: [V8] servotronic connection on 90 V8?

1990 models didn't have Servotronic.  Perhaps the wiring harness was set up
for it beforehand, I don't know.  I pulled up the wiring diagram ...
it indicates that the wires to N119 (Servotronic Solenoid Valve) are Green
and Grey/White ... so, it looks like the answer is yes, that connector is
intended to attach to the control valve on the rack ... 

Steve B
San Jose, CA (USA)
> 
>   I've noticed a black spring clip connector (light green & white/grey 
> wires) on the bundle of wires zip tied near the MC,  (The brake fluid 
> low warning, & hood light switch wireing are included in the bundle of 
> wireing).
>  Is this the servotronic connector?
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!