FW: [V8] e-brake adjustment

[Nadjkovic Kraig A TSgt 552 CMS/MXMVC]

 Tony, you know good and well you don't know anything about parking brakes.
nadj

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Tony and Lillie
Sent: Wednesday, September 08, 2004 3:02 PM
To: Mike Arman
Cc: v8 at audifans.com
Subject: Re: [V8] e-brake adjustment

That's about it, just tighten up the nut till it is at the right height.

Tony
----- Original Message -----
From: "Mike Arman" <armanmik at earthlink.net>
To: <v8 at audifans.com>
Sent: Wednesday, September 08, 2004 2:29 PM
Subject: [V8] e-brake adjustment


>
>
> Anything special to adjusting the parking brake lever travel on a 90 V8?
>
> Tighten the adjusting nut at the cable "Y"?
>
> Everything works, just the handle is too high when the brake is applied.
>
>
> Best Regards,
>
> Mike Arman
> (Audi V8 . . . it isn't just a car, it's an ADVENTURE!)


----------------------------------------------------------------------------
----


> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all 
> contributions welcome!
> 

_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!