[V8] V8 cutting out at about 1800 rpm Hall sensor

[Jeremy Ward]

Hey guys, what are the symptoms when a cam jumps one belt tooth?  Could that be what's going on?

Glb,

How many miles does your V8 have? Do you know when (and where) the timing belt was last done?

Regards,

- Jeremy 


--------------------------
Sent from my BlackBerry Wireless Handheld


-----Original Message-----
From: v8-bounces+jward=mti-interactive.com at audifans.com <v8-bounces+jward=mti-interactive.com at audifans.com>
To: V8 at audifans.com <V8 at audifans.com>
Sent: Fri Sep 17 06:57:00 2004
Subject: Re: Re: [V8] V8 cutting out at about 1800 rpm Hall sensor

Here is the latest on the  v8 cutting out at 1800. They have been able 
to get it to through a code (cam position) I think this may be the hall 
sensor. I feel strongly it not the dist. cap rotors or wire as they have 
all been replaced with new and we have the same results as the old. The 
v8 does not loose power as some of the post indicate, - it cuts out hard 
when above 1800. As for the fly wheel teeth - man I hope they are all 
there! Thanks for all the thoughts - I'll let the list know when it's 
running well again. I want it back before the snow - wahooooo!


_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!