[V8] V8 crankshaft bolt pattern

[Jason Wilkerson]

I had no Idea that the original post would start such a large posting - I
think it is great - I can't remember a time since I started this list that
I had 42 new v8 messages in my inbox in a days time!  Anyway, I think
Keith is on to what I'm doing - I do want to retain the original Isuzu 4wd
(I won't do the swap if I can't) - the gear ratios must be very close
because of the rpm vs mph on each car, in fact it must be almost exact.  I
too worry about the oil pan, but who says you can't fabricate that - I
have made a few hydraulic oil tanks in my day - If memory serves the upper
v8 pan is flat all around so it makes it that much easier!  Also the Isuzu
is an 88 model so a 90 model engine will make things better!

                                               Thanks again,
                                                             Jason


		
__________________________________ 
Do you Yahoo!? 
All your favorites on one personal page – Try My Yahoo!
http://my.yahoo.com