[V8] Re: light

[Dave Head]

The passenger side one's got a hole in it, and the outer, lower pivot is 
broken from a minor collision that occured before I bought the car. If 
you put clear tape over the hole (which I did for 2+ years) and epoxy 
the pivot it'll do fine and is barely noticeable. If you want it you can 
have it free if you want to pay for the cost of shipping it.

The 'clips' are black plastic which slide up where the outside bottom 2  
screws go. 2 per side. They have 2 fingers which go into a slot on the 
body. When you thread the screw through it expands the fingers and 
clamps the light tightly to the body - almost like a 'standoff' clip 
does on a PC motherboard. I'll copy this to the list - if someone has 
ETKA they can look up the part number for you. 90 V8 mounting clamp/clip 
for headlights.

Z1 Performance wrote:

> Got it today, thanks.
>  
> What were the clips you told me to get again?  Got to order them tomorrow.
>  
> Also, your light is in MUCH better shape than even the other one on 
> the car (its all pitted) - feel like selling me the passenger side one ;)
>  
> Thanks for all your help!
>  
> Adam
> Z-1 Performance, Inc.
> www.z1auto.com <http://www.z1auto.com>
> (631)863-3820 Tel.
> (631)863-3821 Fax