[V8] new problem I need help with - no start :(

[Jeremy Ward]

That's the most likely culprit.  Have you tried blinking the trouble codes?  Very easy to do, go to www.sjmautotechnik.com and search for V8 ECU and follow the steps.  Of course you guys may have a VAG 1551 / 1552 (or emulator) tool at your shop that will pull the codes just as easy.

--------------------------
Sent from my BlackBerry Wireless Handheld


-----Original Message-----
From: v8-bounces at audifans.com <v8-bounces at audifans.com>
CC: V8 at audifans.com <V8 at audifans.com>
Sent: Thu Jan 20 18:08:42 2005
Subject: Re: Re: [V8] new problem I need help with - no start :(

thanks for that...might be tough to diagnose till it happens, but should be able to get it sorted
if thats the problem...basically this is a crank sensor then..makes sense

Anyone else?

Adam
Z1 Performance
www.z1auto.com
631-863-3820


----- Original Message -----
From: cobram at juno.com
To:  z1sales at z1auto.com
Cc: V8 at audifans.com
Sent: Thu, 20 Jan 2005 20:36:48 -0500
Subject: Re: [V8] new problem I need help with - no start :(

Sounds like reference sensor.

http://www.audifans.com/archives/1999/05/msg02438.html

BCNU,
http://www.geocities.com/cobramsri/

"Z1 Performance" <z1sales at z1auto.com> writes:

> down a leak, and left it running.  Came out about 10 minutes later, 
> car was off.  Restarted it, went back inside, checked a few minutes 
> later, again, turned off.  Then it would not restart for about a 
> half hour!