[V8] Re: Broken Wheel Bolts

[Brandon Rogers]

When I broke a bolt head off a strut housing on my urq about a year ago I
tried an easy out with no luck - it broke too.  So I just lugged the piece
to a local welder/machine shop where they got it out by lunchtime (while I
was at work) for only $40 - well worth it IMO...ISTR them saying something
about burning it out or something??

Brandon

----- Original Message ----- 
From: "Kneale Brownson" <knotnook at traverse.com>
To: <200q20v at audifans.com>; <quattro at audifans.com>; <v8 at audifans.com>
Sent: Thursday, January 27, 2005 4:50 PM
Subject: Broken Wheel Bolts


> Anybody faced this before:
> http://www.pbase.com/kneale_brownson/image/39122017  Those holes you can't
> see through have broken-off ends of wheel bolts in them.   The broken
bolts
> are at    http://www.pbase.com/kneale_brownson/image/39121870
>
> I was wondering why I was hearing a strange noise.
>
> The Bolts were tightened by hand and torqued with a torque wrench, a
> process I've done many, many times.   I checked bolt tightness again after
> about 100 miles of driving.   Nothing was loose.
>
> Any guesses as to why the bolts broke?
>
> Any suggestions for removing the broken off stuff?  Since taking the pix I
> have bathed them in Kroil.  I have a set of those reverse drill bits with
> extractors.  Do I need to be accurate in centering one of the bits?  The
> exposed surfaces are uneven.  Should I use the largest size I have?
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v