[V8] long day of maintenance and a question

[Miller, Chris]

Sounds just like the 200, except that the V8 seat rails extend over the
top of the bolts.   I've got to pull off the plastic cover on the end of
each seat rail; but it still looks like the metal covers the top of the
bolts.  Connolly seats, if that matters, '93 V8. 

-----Original Message-----
From: Tony and Lillie [mailto:tonyandlillie1 at earthlink.net] 
Sent: Sunday, June 12, 2005 5:58 AM
To: Miller, Chris; v8 at audifans.com
Subject: Re: [V8] long day of maintenance and a question

<SNIP>
Subject: [V8] long day of maintenance and a question


Any idea on how to remove the front bolts mounting the seats?  My carpet
is a bit wet and it's not drying out, so I need to pull the seat and
lift the carpet.
<SNIP>



Easy. There are two on each seat. 13mm heads. Move the seat all the way
back. You should see one on each side of the front. Unscrew and slide
the seat back a bit. Then, tip it up some to get to the electrical
connections. 
There are three or four. Then, slide it out the rest of the way.

Tony Hoffman