[V8] removing front seats

[Miller, Chris]

I removed the plastic end covers, and the plastic lower cover over the
bolt heads.  There are two zip ties, but they don't seem to be retaining
anything.  I'll look again. 

-----Original Message-----
From: Dave Head [mailto:v8q at bellsouth.net] 
Sent: Sunday, June 19, 2005 6:43 PM
To: Miller, Chris; v8newlist
Subject: Re: [V8] removing front seats

Did you remove the two 3" long blocks in the tracks that are zip tied in
place (one per side)?

Miller, Chris wrote:

>Still stuck figuring out how to remove the front seats.  With the seats

>all the way back or all the way up, there's only about 1/3" above the 
>front mounting bolts, and I don't have anything that small to fit in 
>there.  The seat rails cover up the bolt in every position I can find.
>Is there a trick I'm missing?
>
>'93 if that makes much of a difference.  They're different than the 
>seats in my old 200.
>
>
>---
>Chris Miller
>Training Development
>[i] The Information Foundry at Robert Bentley, Inc.
>Tel: 617.528.4113
>Cell: 617.875.3792
>mailto:chris.miller at infofoundry.com
>http://www.infofoundry.com
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: 
>http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
>
>  
>