[V8] High Beams

[Kneale Brownson]

And even if it is the connector, the melted plastic contaminates the
terminal on the switch, so it has to be cleaned thoroughly.  I used narrow
strips of crocus cloth sort of like dental floss to get a good connection
after replacing the melted connector and burned wire end on the harness.

At 10:57 AM 3/26/2005 -0500, DasWolfen at aol.com wrote:
>In a message dated 3/26/05 9:43:22 AM Eastern Standard Time, 
>rbroberg at wi.rr.com writes:
>
>> It is not likely the switch but the connector at the switch.
>
> I'll disagree with that..... its about a 50/50 shot on which is the current 
>culprit.