[V8] rough cold starts

[george.fallot@verizon.net]

    The code I am getting is 2312. In the morning I will try to test it at
the ecu plug.
 Thanks,George
----- Original Message ----- 
From: "Paul Jager" <pjager at telus.net>
To: <george.fallot at verizon.net>
Sent: Saturday, November 05, 2005 2:16 PM
Subject: RE: [V8] rough cold starts


> Check the sensor signal at the motronic plug- verify the signal is in
range.
>
> Paul Jager
> www.jageng.com/auto_1.htm
>
> -----Original Message-----
> From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com]On Behalf
> Of george.fallot at verizon.net
> Sent: November 5, 2005 3:55 AM
> To: V8 at audifans.com
> Subject: Re: [V8] rough cold starts
>
>
> Yes I did clear the codes but more importantly I still have the trouble.
> George
> ----- Original Message -----
> From: "Kent McLean" <kentmclean at mindspring.com>
> To: <george.fallot at verizon.net>
> Cc: <V8 at audifans.com>
> Sent: Friday, November 04, 2005 6:49 PM
> Subject: Re: [V8] rough cold starts
>
>
> > george.fallot at verizon.net wrote:
> >  > I pulled the codes and got the coolant sensor code. I tested
> >  > the sensor and replaced it. But I still have the same code and
> >  > problem.
> >
> > Did you clear the codes?  I know on the 200 and my '94 100,
> > you need to clear the codes; otherwise, you will still see
> > the old code after replacing the bad sensor. That may also
> > be true of the V8.
> >
> > --
> > Kent McLean
> > '94 100 S Avant, "Moody"
> > '89 200 TQ, "Bad Puppy" up in smoke
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>